12V 2A DC Pin Power Adapter Charger For Board and Router

Key Specifications

• Output Voltage: 12 Volts (V) DC
  → Provides a stable 12V power supply to connected devices.

• Output Current: 2 Ampere (A)
  → Indicates the maximum current the adapter can deliver. Devices requiring more than 2A might not function correctly or could damage the adapter.

• Input Voltage: 100–240 Volts AC, 50/60 Hz
  → Wide universal input range for compatibility across regions.

• Pin Type/Connector:
  → Commonly features a 2-pin or 3-pin plug for wall socket (regional variants, e.g., Indian plug type).
  → Output connector is typically a 5.5mm DC barrel plug.

Common Features

• Stabilized Output:
  → Consistent and regulated 12V DC output ensures reliable operation for sensitive electronics.

• Low Ripple & Interference:
  → Reduces electrical noise for enhanced performance and protection.

• Short Circuit Protection:
  → Shuts off power during short circuits to protect the adapter and connected devices.

• Overload Protection:
  → Prevents damage if excess current is drawn by the connected device.

• High Efficiency & Low Power Consumption:
  → Engineered for energy-saving performance.

• Power LED Indication:
  → A small LED light signals power status when the adapter is active.

• Compact & Lightweight:
  → Portable, user-friendly design for daily use.

• Cable Length:
  → Approximately 1 meter (3.5 feet), suitable for standard usage.

Typical Applications / Compatible Devices

The 12V-2AMP adapter is compatible with a wide range of low-power electronic devices that require a 12V DC input:

• Set-top boxes

• CCTV cameras and surveillance systems

• LED boards and LED strip lights

• Wireless routers and broadband modems

• Tablets (older or specific low-power models)

• Cordless phones

• Weighing scales

• DIY kits and electronic development boards (e.g., Arduino, Raspberry Pi)

• USB-powered devices (if compatible cables/adapters are used)

• ADSL modems and networking equipment

• Certain printers and scanners

• IT gadgets and other devices matching 12V/2A specs

Important Note

Always verify the voltage and current requirements of your device before use. Using an adapter with incorrect specifications can lead to device malfunction or permanent damage.