DF13 6-Pin Flight Controller Cable 20Cm for Multirotor Quadcopter
- Buy from 1 to 4 products @ ₹102.42 per item
- Buy from 5 to 9 products @ ₹84.08 per item
- Buy from 10 to 24 products @ ₹78.40 per item
- Buy above 25 @ ₹72.40 per item
Customize
Product Details
Readytosky DF13 6-Pin Flight Controller Cable (20cm) – Mission-Critical Data Link
Ensure flawless communication between your flight controller and high-bandwidth peripherals with the Readytosky DF13 6-Pin Cable. This 20cm data lead is a staple for professional-grade DIY drone builds, specifically designed to meet the high-density connection standards of the APM 2.6/2.8 and Pixhawk ecosystems.
Featuring the industry-standard Hirose DF13 series interface, this cable provides a secure, vibration-resistant latching mechanism. It is most commonly used for high-priority connections like GPS with integrated compass units, Telemetry radios, and Power Modules, where losing a single pin connection could mean the difference between a successful RTH (Return to Home) and a flyaway.
Key Highlights:
Genuine Hirose-Style Interface: Utilizes the low-profile, 1.25mm pitch DF13 connector favored by ArduPilot and PX4 hardware for its reliability in high-vibration environments.
6-Pin Multi-Channel Support: The 6-wire configuration is perfectly mapped for combined GPS/Compass modules or full-feature Telemetry kits that require RX/TX, Power, Ground, and I2C lines.
Perfectly Proportioned: At 20cm (200mm), this cable is long enough to reach from a centrally mounted flight controller to an elevated GPS mast on most 450mm to 650mm frames.
High-Flex Silicone Wiring: The flexible internal wiring allows for tight routing through frame plates and around standoffs without putting undue stress on the flight controller's delicate vertical pins.
Universal APM/Pixhawk Support: A direct "plug-and-play" replacement for the standard 6-pin cables included with original 3DR and Readytosky sensor kits.
Technical Specifications
| Feature | Details |
| Brand | Readytosky |
| Connector Type | DF13 (6-Pin) |
| Pitch | 1.25mm |
| Length | 20cm (200mm) |
| Compatibility | APM 2.5/2.6/2.8, Pixhawk, GPS, Power Modules |
| Application | Data, Power, and Signal Transmission |
Pro-Builder Tip:
The 6-pin DF13 is most commonly used for the Power Module port. Because this cable carries the voltage and current sensing data that your flight controller uses to trigger failsafes, always ensure the connector is fully seated and the wires are free from any tension or sharp bends.
Partsbaba Quality Assurance: We only supply 100% genuine Readytosky components. Every cable is backed by our 14-day replacement warranty against manufacturing defects, ensuring your drone's internal "nervous system" is reliable from the very first power-up.